Display Functions - Dometic AH-Elite Control Manual Del Usuario

Operating the system
8.3 Changing fan settings
Changing between automatic and manual mode
The user can choose between four different settings regarding the fan operation:
• Automatic operation
• Low speed fan operation
• Medium speed fan operation
• High speed fan operation
➤ Press button
speeds.
✓ The fan indicators mark the current choice of fan operation.
Changing between cycled and continuous fan operation
➤ Press and hold button
✓ The display shows the new setting by displaying "CYC" for cycled or "CON" for
continuous fan operation.
8.4

Display functions

Show the set point temperature
I
NOTE
Each time button
increases or decreases by 1 degree.
➤ Press one of the button
✓ The display shows the set point temperature for 5 seconds before the display
changes back to the inside air temperature.
Show outside air temperature
I
NOTE
The outside air temperature can only be displayed if the optional outside
air sensor is installed.
➤ Make sure that the system is in on mode.
➤ Press the buttons
16
to choose automatic fan operation or one of the three manual fan
for 5 seconds to change the setting.
or button
or .
and simultaneously.
is pressed the set point temperature
AH-Elite Control
EN