Assembly Instructions - Sportplus SP-HT-9600-iE Manual De Instrucciones

6. ASSEMBLY INSTRUCTIONS

Take all parts out of the packaging carefully and place them on a flat surface. When doing this,
use suitable padding to protect the working surface. Assembly of the individual parts should
be carried out by 2 people!
Some parts have already been pre-assembled to simplify the assembly process for you.
STEP 1
15 16
2
1. Attach the front base column (2) to the main frame (1). Secure the connection with 4 hex
screws (15) and 4 bent washers (16).
2. Attach the rear base column (3) to the main frame (1). Secure the connection with 4 hex
screws (15) and 4 bent washers (16).
SP-HT-9600-iE-IM-INT-V04.indb 34-35
1
15
16
3
34
6. ASSEMBLY INSTRUCTIONS
STEP 2
4
33
34
16
16
18
15
1. Connect the upper computer cable (33) to the lower computer cable (34).
2. Fasten the handlebar tube (4) to the main device (1). Secure from the front with 2 sets of
hex screws (15) and flat washers (18) and from the side with 2 sets of hex screws (15) and
bent washers (16).
15
1
35
3/31/17 3:16 PM