Roadstar HIF-1902HP Manual De Instrucciones página 10

5 English
3. Select a desired track by pressing skip or buttons (3).
4. Press the " PLAY MODE " button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press cd " play/pause (2) to play the
disc in assigned order.
7. To cancel the programmed file, press "stop" button.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored in the memory me-
dia with usb connecting port.
1. Set function selector (15) at cd/usb mode and then press FUNCTION button (6) to select
usb.
2. Plug-in the usb plug with the face up & make sure it going into completely.
3. The system will start reading the storage media automatically after connecting, and lcd di-
splay (18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only though the usb

port.
If connect the system to mp3 player via the usb socket, due to variances in mp3 encoding

format, some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
Connecting the usb upside down or backwards could damage the audio system or the sto-

rage media (usb thumb drive). Check to be sure the direction is correct before connection.
LISTENING TO TAPE
1. Set the Function button (6) to " TAPE " mode. The system will start playback automatically
after inserting the cassette tape.
2. Press " TAPE FORWARD / EJECT " Button (33) half inwards during playback mode. The
tape will wind forward.
3. Slightly press the " TAPE FORWARD / EJECT " Button (33) again to resume playback.
4. Press the" TAPE FORWARD / EJECT " Button (33) completely inwards and the cassette
tape will be ejected through the cassette door cover (34).
AUX IN FUNCTION
You can put the other audio products through the Aux in jack (49). Press the function button
to "TAPE".
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to encode normal cd, cassette or turntable to mp3 format and recording at
memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1. Perform normal playback of the cd track you want to encode & record,
2. Press " record " button (9) twice during the playback of the desire track, unit will display.
Encoding is performing now.
3. Press the STOP button to finish recording the track.