Playing Compact Disc - Roadstar HIF-1902HP Manual De Instrucciones

2. Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1. Press the PHONO button (31) to select the TURNTABLE function.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
central spindle when playing 17cm EP records.
3. Set the Speed Selector (24) to 33/78 or 45 rpm according to the record.
4. Release the tonearm clamp, and remove the protective cap from the stylus.
5. Lift the Tonearm with the Tonearm Lift Lever.
6. Move the tonearm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
8. When the record is finished the tonearm will automatically stop. Lift the tonearm from the
record and return it to the rest.
9. To stop manually, lift the tonearm from the record and return it to the rest.
Notes: Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the Tonearm clamp could result in damage to the Tonearm. Replace the protective
cap on the stylus when not in use.

PLAYING COMPACT DISC

To start
1. Press function selector (26) to select " CD/USB" mode.
2. Press "open/close" button (11) to open the cd door (10).
3. Place a cd with the printed side facing up inside the tray & then close the co door.
4. Focus search is performing, the first track will start playback.
5. To interrupt, press the " STOP " button (32) once, the total number of tracks compare on
the lcd display (18). Press again PLAY/PAUSE to resume normal playback.
Skip/search mode (skip/search up / skip/search down)
During play or pause mode, if "skip up" button (3) is pressed. it will go to next track and di-

splay the track no. and then remain the play or pause mode.
During play or pause mode, if "skip down" button (3) is pressed. it will go back to the begin-

ning of the track, original track number is display and remain the play or pause mode.
After step 2, press "skip down" button (3) again will go to the previous track and remain the

play or pause mode.
If press and hold the " skip up/down button " (3) during cd/mp3 playabck, the playing track

will go fast forward or backward until the button being released.
To skip 10 tracks UP or DOWN press the TRACK +10 or TRACK -10 button on Remote

Control.
REPEAT/RANDOM MODE
Press the REPEAT button from Remote Control or PLAY MODE from main unit to activate
this function. All the tracks can be played in difference mode as follow:
Repeat play: you can listen the desired tracks or folder repeatedly by this function.

Random play: you can listen all the tracks or folder in a random order by this function

CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any order. before use, be
sure the system is at stop mode before programming:
1. Press cd/usb mode & stop the cd playback.
2. Press the "PLAY MODE" button, " P " will appear on lcd display (18). Moreover, it will indi-
cate program no. and digits for track no. to be programmed.
English 4