Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Measure here.
6. Install the Top Track
Measure the distance from wall to wall at the top of the wall jambs.
Mark the top track at the determined dimension.
NOTE: For best results use a 32-teeth per inch hacksaw and miter box.
Cut the top track on the inside edge of the mark [approximately 1/32" (1 mm) from the mark] to
allow space for the top track to slide into place easily.
Carefully file the rough edges smooth where the top track was cut, taking care to avoid damaging
finished surfaces.
Position the top track over the wall jambs and gently push down.
Sterling
9
1034041-2-A
Publicidad
Tabla de contenido
