Cup Warmer (Optional); Emergency Conditions; Programming Menu; (Electronic Machine) - Grimac G 11 Manual Del Usuario

6.5 Cup warmer (optional)

Attention: do not cover the cup warmer
plate with a cloth.
Machines can be equipped with a cup-warming plate for the
storage and heating up of the cups.
On the plate only place coffee cups, tea cups and glasses for
the service of the coffee machine. No other objects must
be placed on the tray.
Thoroughly drain the cups before placing them on the tray.
To activate the "cup warmer" func-
tion press the key positioned on
the machine's instrument panel.

6.6 Emergency conditions

To stop the machine in any emergency situ-
ation decisively turn the selector switch to
the "0" position.
In the event of freeze, contact the service centre of a skilled
technician.
In the event of fire, evacuate the area im-
mediately to permit the action of trained
personnel equipped with suitable protec-
tion means. Always use approved extin-
guishers and never use water or substanc-
es of uncertain nature.
44
All manuals and user guides at all-guides.com

7 PROGRAMMING MENU

Machines with electronic control panel allow programming
the quantity of coffee and hot water dispensed by simply
touching a button.
For example, let's examine the programming of a double
machine.
• To access dose programming mode, press the
• Press the button corresponding to the selection to be
• After obtaining the desired volume. press the button
• Before proceeding with a new selection, check that the
• In the same way you can programme the amount of water to
• THE LEFT BUTTON PANEL ALSO PROGRAMMES THE OTHER

(ELECTRONIC MACHINE)

N.B. Before programming the coffee keys,
prearrange the machine for the dispensa-
tion as shown in paragraph 6.2.1. Place the
cup or small cup under the dispensing spout.
button for at least 5 seconds until the corresponding led
remains on.
programmed. The pump and the solenoid valve of the
group are enabled.
again. Brewing stops.
LEDs of the previous selection are switched OFF and pro-
ceed as before for the new dose to dispense.
be dispensed by the machine by using this button
ONES.
NOTE: to ensure a proper programming, re-
place the coffee grounds with fresh coffee
before each dosing procedure.
NOTE: The dosage of this machine is volu-
metric.
.