29 9.1 Temporary Shutdown; 30 9.2 Change Of Location; 30 9.3 Disposal And Scrapping; 30 9.3.1 Substances Hazardous To Water - Beissbarth VLH 4440 Manual Original

en 42 | VLH 4440 | Decommissioning
9. Decommissioning
9.1 Temporary shutdown
In the event of lengthy periods of non-use:
¶
Disconnect the VLH 4440 from the mains.
¶
Lock the master switch.
9.2 Change of location
¶
Disconnect electrical and pneumatic connections.
¶
The VLH 4440 is only ever to be transported in the
original or equivalent packaging.
¶
If the VLH 4440 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
¶
Heed the notes on initial commissioning.
9.3 Disposal and scrapping
9.3.1 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
9.3.2 VLH 4440 and accessories
1. Disconnect electrical and pneumatic connections.
2. Dismantle the VLH 4440 and sort out and dispose
of the different materials in accordance with the
applicable regulations.
VLH 4440, accessories and packaging should
be sorted for environmental-friendly recycling.
¶
Do not dispose VLH 4440 into household
waste.
Only for EC countries:
The VLH 4440 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of prevents environmental
pollution and possible health hazards.
|
1 692 846 001 2017-04-27

10. Technical data

10.1

Ambient conditions

10.1.1

Use

Property
Temperature
Humidity
10.1.2

Storage and transportation

Property
Temperature
Humidity
10.2

Performance data

10.2.1

Lifting platform

Property
Loadbearing capacity
Lifting height
Lifting time
Drive-on height
10.3

Operating data

10.3.1

Electric power

Property
Rated voltage
Number of phases
Frequency
Rated current
Rated power
Current, highest load
Fuse protection
Operating factor
Control voltage
Degree of protection
Safety class
10.3.2

Pneumatic system

Property
Operating pressure
10.3.3

Hydraulic system

Property
Operating pressure 180 bar
Pump delivery volume 6.1 ccm
Tank volume 11 l
Type of fluid (see also Sec. 7.2)
Value/Range
0 °C – 45 °C
32 °F – 113 °F
20 % - 80 %
Value/Range
-5 °C – 50 °C
23 °F – 122 °F
30 % – 95 %
Value/Range
4000 kg
1920 mm
45 s
170 mm
Value/Range
400 V AC
3P / PE
50 Hz
7.5 A
3 kW
20 A
3 x 16 A
S3 -50 %
230 V AC
IP 54
/ II
Value/Range
8 – 10 bar
Value/Range
180 bar
6.1 ccm
11 l
Hydraulic fluid as
DIN 51524
Beissbarth GmbH