Adjust Air Quality Sensor - Coway AP-1216L Manual Del Usuario

All manuals and user guides at all-guides.com

ADJUST AIR QUALITY SENSOR

When the product is shipped out, the air quality sensor is set to standard sensitivity. If the
pollution level stays at the highest level after 2 hours of operation or stays at the lowest level
for more than 1 hour when the air does not seem clean, users can adjust the sensitivity of the
air quality sensor as follows.
1. While the air purifier is on, press the airflow speed button and
ionizer button for 2 seconds.
2. The speed indicator will flash at 1.0 second intervals with beep.
The speed indicator blinks to show the sensor sensitivity.
3. Adjust the sensitivity by pressing the speed button.
The speed indicator blinks to show the sensor sensitivity.
Speed step 1
High
- High sensitivity: If the air purifier indicates a pollution level
- Low sensitivity: If the air purifier continues to indicate the highest pollution level even after
4. Press the airflow speed button and ionizer button for 2 seconds.
The air purifier will then resume normal operations.
- The new setting will also be applied if no button is input for
10 seconds.
9
Speed step 2 Speed step 3
Standard Low
of 1 for longer than one hour when the actual pollution level is higher.
running the air purifier for more than two hours.
12hr
8hr
2 seconds
4hr
AUTO 1hr
IONIZER FAN SPEED TIMER LIGHT
12hr
8hr
4hr
HEPA
AUTO 1hr
Odor
IONIZER FAN SPEED TIMER LIGHT FILTER
RESET
12hr
8hr
4hr
HEPA
AUTO 1hr
Odor
IONIZER FAN SPEED TIMER LIGHT
FILTER
RESET
12hr
8hr
2 seconds
4hr
AUTO 1hr
IONIZER FAN SPEED TIMER LIGHT
HEPA
Odor
FILTER
RESET
HEPA
Odor
FILTER
RESET