Joie steadi Manual De Instrucciones página 9

iii. Forward Facing
Installation
see images
-
22 25
!
The child seat can not be used if the
vehicle safety belt buckle (female
buckle end) is too long to anchor the
child seat securely. -1
22
Note
1. Please adjust the shoulder
harnesses to proper height
(slightly above the child's
shoulder) before installing the
child seat.
2. Please adjust the child seat to
proper angle (3 positions for
forward facing mode). Angle
indication: with top red artwork
align with bottom reclining
position indicator, as
21
3. When installing and adjusting the
safety belts, make sure that both
the shoulder belt and the waist
belt are not twisted and will not
keep the safety belts from being
properly positioned.
13
22
1
23
While pressing the child seat, pull
child seat
the belts to fasten the
tightly and securely.
24
!
Please check by moving the
child seat back and forth.
!
Shoulder belt passes through
Lock-off Device, confirm the
Lock-off Device is pushed
down, as
23
!
The vehicle buckle tongue is
engaged with the buckle
correctly, as
22
iv. Securing your Child in
the child seat
see images
-
26 27
Note
1. When installing the child seat in
the forward facing mode, DO NOT
use the small seat pad.
2. Please install the child seat on the
vehicle seat, and then put the child
in the child seat.
3. After the child is placed into the
child seat, check whether the
shoulder harnesses are at proper
height.
24
25
14