1. Loosen the shoulder belts by
activating the belt adjuster on the
center and simultaneously pulling
both shoulder belts upwards.
2. Open the belt buckle by pressing
firmly on the red button.
-1.
10
place the child in the seat and put
the shoulder belts over the child's
shoulder.
26
3. Bring both belt tongues together
and lock them into place in the
belt buckle with an audible
"CLICK".
11
4. Pull down the adjustment
webbing and adjust it to the
proper length so that your child is
snugly secured.
27
!
Make sure the space between
the child and the shoulder
harness is about the thickness
of one hand.
Height Adjustment
for Head Support and
Shoulder Harnesses
see images
28
1. Please adjust the head support
and shoulder harnesses to proper
height according to the child's
height.
2. Squeeze the head support
adjustment lever
-1, meanwhile
28
pull up or push down the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
28
15
26
12
27
28
1
Cautions
!
After removing the foam of small seat pad, please store it somewhere that
the child can not access it.
!
Please wash the soft goods with cold water under 30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted neutral detergent, gasoline or other organic solvent to
wash the child seat. It may cause damage to the child seat.
!
Do not twist the soft goods to dry with great force. It may leave the soft
goods with wrinkles.
!
Please hang dry the soft goods in the shade.
!
Please remove the child seat from the vehicle seat if not in use for a long
period of time. Put the child seat in the shade and somewhere your child
can not access it.
Soft Goods Assembly
see images
-
29
34
1. Place the seat pad on the body and
thread the buckle through the seat
pad slot.
29
2. Wrap the buckle with the crotch strap
and stick the velcro.
3. Thread the adjustment webbing and
harnesses on both sides through the
seat pad respectively.
30
29
30
16