Cleaning the Air Filter
If there is a noticeable loss of engine
power
1
2
Open the twist lock (1) in the
N
direction of the arrow.
Remove the carburetor box
N
cover (2).
Clean away loose dirt from around
N
the filter.
Remove the filter.
N
Knock out the filter or blow it clear
N
with compressed air from the inside
outwards.
Always replace damaged filters.
N
If filter is caked with dirt:
Wash the filter with STIHL universal
N
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
NOTICE
Do not use a brush to clean the fleece
filter.
MS 193 T
Place the filter (3) in position.
N
Fit the carburetor box cover.
N
Engine Management
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
English
35