Specifications - Stihl MS 193 T Manual De Instrucciones

English

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
STIHL single cylinder two-stroke engine
MS 193 T
Displacement: 1.84 cu. in
(30.1 cc)
Bore: 1.46 in (37 mm)
Stroke: 1.10 in (28 mm)
48
Engine power to
ISO 7293: 1.7 bhp (1.3 kW)
Idle speed: 3,000 rpm
Max. permissible
speed (with cutting
attachment): 13,000 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR 6H
Electrode gap: 0.020 in (0.5 mm)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 9.1 fl.oz (0.27 l)
Chain lubrication
Fully-automatic speed-controlled oil
pump with rotary piston
Oil tank capacity: 7.4 fl.oz (0.22 l)
Weight
dry, without bar and chain
MS 193 T: 7.3 lbs. (3.3 kg)
Cutting Attachments
Recommended cutting attachments
conforming with applicable standards
when used on this model chain saw (see
the chapter on "Safety Precautions and
Working Techniques"):
Rollomatic E guide bars
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30, 35, 40 cm
(12, 14, 16 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in)
Sprocket nose: 7-tooth
Actual cutting length will be less than
listed bar length.
Rollomatic E Light guide bars
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30, 35, 40 cm
(12, 14, 16 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm (0.050 in)
Sprocket nose: 9-tooth
Actual cutting length will be less than
listed bar length.
Saw chain 3/8" P
Low kickback STIHL saw chain (with
green label)
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm (0.043 in)
MS 193 T