Steren MIX-380 Manual De Instrucciones página 20

CONTROLS
1. Mic input: XLR balanced: Can receive balanced signals.
2. Line input: ¼" balanced TRS inputs. Can use it as non-
balanced input. Can receive balanced and impedance signals.
The mic input and the line input cannot be used simultaneously
with in the same channel.
3. Mic switch: Choose between the mic input signal and the line
input signal. Has a 40dB attenuation level.
4. Peaks: The peak LED illuminates when a channel is going into
overload.
5. Gain control: Allow one to set the dB input level 40dB range.
6. High-pass filter switch: Removes the low frequencies signals
below 100Hz.
7. High EQ: Set the high frequency levels (+15dB). Attenuation
level of 10kHz, remove noise or add brilliance to the signal
depending on the quality of the source.
4
1
2
3
4
5
6
7