Steren MIX-380 Manual De Instrucciones página 23

22. Low EQ: set the bass frequency level. Add
depth to thin-sounding signals. As with any EQ,
use sparingly. Too much of this Q can give you a
booming bottom end. Attenuation level of 100Hz.
23. Aux 1: control the signal level of the auxiliary 1
channel.
24. Aux 2: control the signal level of the auxiliary 2
channel and the effect of the each line.
25. Pan: set the audio signal balance, right channel
/ left channel. If you want to hear both channels,
put the knob on the middle of stage. If you want to
hear only the right channel, move the knob to the
right; of you want to hear the left channel, move the
knob to the left of the stage.
26. Volume: set the volume level for channel 7/8.
22
23
24
25
26
7