Steren MIX-380 Manual De Instrucciones página 21

8. Treble frequency EQ: Set the middle frequency
levels (350Hz to 5kHz).
9. Mid tone EQ: Set the middle tones level (+15dB)
(350Hz to 5kHz).
10. Low EQ: Set the bass frequency level. Add
depth to thin-sounding signals. As with any EQ,
use sparingly. Too much of this Q can give you a
booming bottom end.
11. Aux 1: Control the signal level of the auxiliary
1 channel.
12. Aux 2: Control the signal level of the auxiliary 2
channel and the effect of the each line.
13. Pan: Set the audio signal balance, right / left
channel. If you want to hear both channels, put the
knob on the middle of stage. If you want to hear
only the right channel, move the knob to the right;
of you want to hear the left channel, move the knob
to the left of the stage.
14. Volume: Set the volume level for each channel.
8
9
10
11
12
13 14
5