Replacing The Ac Solenoid - NAMCO SPIN THE SPIN Manual Del Operador

7-10

Replacing the AC Solenoid

1. Remove the back door.
2. Remove the pozi head screw (M3x8) holding the spring clip in place and
remove the spring clip. Remove the spring shaft
3. Remove the 3 socket cap screws screws (M4x12) that hold the spring
bracket in place and remove the spring bracket.
4. Remove the socket cap screw (M6x20) holding the adjuster rail and
balancer in place.
5. Disconnect the connector.
6. Remove the 4 Nyloc nuts (M4) holding the solenoid bracket (B) in place,
and pull both the bracket (B) and the balancer towards you, keeping them
level.
Page 47