Seesaw Assy; Replacing The Target; Removing The Seesaw Assy - NAMCO SPIN THE SPIN Manual Del Operador

7-13

Seesaw Assy

7-13-1 Replacing the Target

Note: Replace the target rubbers
(4 pieces) when replacing
the target.
1. Remove the 2 security
screws (M5x20), 4
security screws (M5x35)
and 6ea flat and spring
washers holding the front
table in place, and
remove the front table.
2. Replace the target and
target rubbers.
3. Reassemble in reverse
order.

7-13-2 Removing the Seesaw Assy

1. Remove the front table
assembly (see section 7-
13-1 above)
2. Remove the 4 socket cap
screws (M6x25), flat and
spring washers holding the
seesaw assembly in place,
and remove the seesaw
assembly.
3. Reassemble in reverse
order.
Page 51