Replacing The Seesaw Spring - NAMCO SPIN THE SPIN Manual Del Operador

7-13-5 Replacing the Seesaw Spring

1. Remove the seesaw assy.
Seesaw Assy")
2. Remove the pozi head screw (M3x8) and snap pin that hold the
spring shaft (A) in place, and pull out the spring shaft (A).
3. Remove the 4 socket cap screws (M6x12) that hold the spring
bracket in place, and remove the spring bracket.
4. Remove the pozi head screw (M3x8) and snap pin that hold the
spring shaft (B) in place, and pull out the spring shaft (B).
5. Replace the seesaw spring.
6. Reassemble in reverse order.
(see section 7-13-2 "Removing the
Page 54