Switch Test - NAMCO MOTOCROSS GO! Deluxe Manual Del Operador

6-3-3-1 Switch Test

1. Select "Switch Test" on the I/O menu screen to test the switches. The
following screen is displayed.
2. The display shows the current state of the switches.
3. Press the Up Select switch and the Enter switch together to EXIT and
return to the I/O menu screen
(a) ................................
(b) ................................ BREAK : 0000
(c) ................................ STEER : 0000
(d) ................................
(e) ................................
(f) ................................
(a) When you twist the accelerator the number increases. OK appears just
before the accelerator is twisted fully on.
(b) When you squeeze the brake lever the number decreases. OK appears
just before the brake is squeezed fully on.
(c) When the handlebars are central, the number shows around '0000' and
CENTER is displayed. When you turn the handlebars to the right, the
number increases and when you turn the handlebars to the left, the
number decreases. OK appears just before the handlebars are turned
fully left or right.
(d) When the bike is central, the number shows around '0000' and CENTER
is displayed. When you lean the bike to the right, the number increases
and when you lean the bike to the left, the number decreases. OK
appears just before the bike is leaned fully left or right.
(e) to (k) OFF will change to ON each time a switch is operated.
I/O TEST
DIP 3 12345678
LINK ON 1
SWITCH
GAS : 0000
BANK : 0000
TEST : ON
COIN : OFF
TO EXIT, PUSH AND
Page 49
SERVICE : OFF ............................. (g)
VIEW : OFF ............................. (h)
: OFF ................................(i)
: OFF ............................... (j)
: OFF .............................. (k)