I/O Pcb Check; How To [I/F Initialize] - NAMCO GUNMEN WARS Manual Del Operador

6-3-3-1 I/O PCB Check

1. Select 'I/O PCB CHECK' from the I/O Test Screen. The following
screen is displayed:-
DIP 4
LINK
Master JV
NAMCO LTD. ; GM;
I/O PCB CONNECT OK
NAMCO LTD. ;ASCA-3; VER2.04
JPN, MULTIPURPOSE + ROTARY ENCODER
Note: This screen is for information only. No adjustments are available.

6-3-3-2 How to [I/F Initialize]

Select 'How to [I/F Initialize]' from the I/O Test menu. The following
screen is displayed.
DIP 4
LINK
(1) HOLDING SERVICE SW AND TURN ON TEST SW
(2) SELECT [GUN INITIALIZE] ON I/O TEST
Note: Initialization cannot be executed from this screen.
I/O TEST
12345678 [ON=RED]
ON 2
I/O PCB CHECK
TX 3536
VER 0.766; JPN
ENTER SW : ENTER
I/O TEST
12345678 [ON=RED]
ON 2
HOW TO [I / F INITIALIZE]
I/F INITIALIZE : (1) OR (2)
ENTER SW : ENTER
Page 47
(see 7 page 56)