Greasing The Gun Assembly - NAMCO GUNMEN WARS Manual Del Operador

8-1 Greasing the Gun Assembly

Greasing should be performed every six months.
1. Remove 4off security screw (M5x16) and remove the Gun Vac-form
Upper,
2. Remove 15off security screw (M5x20) and remove the Gun Vac-form
Lower.
Security screw
(M5 × 20)
Security screw
(M5 × 20)
3. Grease the circumfrance of the bearings.
Recommended grease : Castrol LM30 or equivalent.
Greasing point
Security screw (M5 × 16)
Gun Vac-form
Upper
Page 59
Security screw (M5 × 20)
Security screw (M5 × 16)
Gun Vac-form
Gun Vac-form Lower
Greasing point
Security screw
(M5 × 20)
Upper
Security screw
(M5 × 20)