Replacing The Blue Led Assembly - NAMCO GUNMEN WARS Manual Del Operador

8-5 Replacing the Blue LED Assembly

To maintain compliance with CE regulations, the following
When replacing the gun assembly or refitting the gun sides after maintenance, the four
screws located on the gun grip must be Nylon Countersunk Head Screws (M4x12), and
the Gun Grip Decals (L & R) must be fitted after the screws have been fully tightened.
Spare screws and decals are supplied with the machine at the time of delivery and
must be kept in the machine and available for use at all times.
Nylon c/sunk screw (M4x12)
Gun side (L)
Nylon c/sunk screw (M4x12)
1. Remove the Gun Sides (L & R). (See 8-4 page62)
2. Disconnect the connector.
3. Replace the blue LED and reassemble in reverse order.
Refit new Gun Grip Decals L & R.
4.
SAFETY WARNING
Gun Replacement or Maintenance.
must be strictly adhered to.
Connector
Page 65
Gun side (R)
Nylon c/sunk screw (M4x12)
Gun grip decal