Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
INSTRUCTIONS
Personal protective
equipment
IMPORTANT!
Whenever
you use a clear-
ing saw, brushcutter
or trimmer
you must
wear personal
protective
equipment
that is
approved
by the authorities.
Personal
protective
equipment
does not eliminate
the risk of accidents,
but it can reduce the
effects
of an injury in the event of an acci-
dent. Ask your dealer for help when
choosing
protective
equipment.
WARNING:
Listen
out for warn-
ing signals
or shouts
when you
are
wearing
hearing
protection.
Always
remove your hearing
protection
as
soon as the engine stops.
GLOVES
Gloves
should be worn when necessary,
e.g., when fitting cutting attachments.
HEARING
PROTECTION
Wear hearing protection
that provides
adequate
noise reduction.
EYE PROTECTION
Always wear approved
eye protection,
if
you use a visor then you must also wear
approved
protective
goggles.
Approved
protective
goggles must comply with
standard
ANSI Z87.1.
BOOTS
Wear sturdy, non-slip
boots.
CLOTHING
Wear clothes made of a strong fabric
and
avoid loose clothing
that can catch on
twigs and branches.
Always
wear heavy.
long pants.
Do not wear jewelry,
shorts
sandals
or go barefoot.
Secure
hair so it is
above shoulder
level.
FIRST AID KIT
Always
have a first aid kit nearby.
Machine's
safety equipment
This section describes
the machine's
safe-
ty equipment,
its purpose,
and how checks
and maintenance
should
be carried out to
ensure that it operates
correctly.
See the
"Know your trimmer"
section to locate
where this equipment
is positioned
on your
machine.
The life span of the machine can be reduced
and the risk of accidents can increase if
machine maintenance
is not carried out
correctly and if service and/or repairs are not
carried out professionally,
if you need further
information please contact your nearest ser-
vicing dealer.
_&
WARNING:
Never use a machine
that has faulty safety equipment!
Carry out the inspection,
mainte-
nance and service routines listed in
this section.
Stop
switch
Make sure the engine stops when you push
and hold the stop switch.
Cutting
attachment
guard
This guard is intended to prevent loose ob-
ects from being thrown towards
the opera-
tor. The guard also protects
the operator
from accidental
contact with the cutting at-
tachment.
WARNING:
Never use a cutting
attachment without
an approved
guard. See the section on "Technical
data". If an incorrect
or faulty
guard
is fitted this can cause serious
personal injury.
Publicidad
