General Indications - Miche SUPERTYPE 338TDX Manual De Uso

ENGLISH

GENERAL INDICATIONS

1
We thank you for buying the Supertype 338 TDX wheels, pro-
duct that will guarantee you security and functionality through
the years.
Before proceeding with using the wheels, please read care-
fully the following instruction and store them in a safe place
for eventually reusing. Fac Michelin S.r.l. reserve to modify the
content of this manual without notice. The updated version will
always be available www.miche.it
On our website you will also find information on the other Mi-
che or Supertype products and the spare parts catalogue.
In the box of wheel set you will find:
• The front wheel arranged with TX-12 system
• The rear wheel arranged with TX-12 system
• Wheel bag
• Vibrostop
• The manual of instructions and use of Wheels
• Zero Point
Warning
!
Any modification or alteration (and graphic) of the product
with non-original spare parts or spare parts not delivered
directly by Fac Michelin S.r.l., involves the expiration of the
guarantee.
Warning
!
Direct and violent impacts on broken road surfaces can
cause damage to the rims. Such damage is outside the con-
ditions of our guarantee and repair costs will be charged
directly to the customer.
Warning
!
In case of strange impact caused from bad road base or
wheels transport, we trust to bring the wheels to your me-
chanic for a check.
Warning
!
Only Shimano original lock ring designed for through axle
internal diameter 27mm to be used with the disc brake.
Warning before using the bicycle:
• Check for proper operation and state of wear of all the com-
ponents before starting to ride.
• Check the tension of the spokes so as to notice any spo-
kes which got loose. In the case spokes are loose, contact
a qualified mechanic or special personnel to perform the
tensioning.
6 SUPERTYPE 338TDX / MICHE.IT
ATTENTION, the use of wheels not centered properly or
with spokes broken and/or loosen or damaged may cause
an accident, serious injury or death.
• Check that the braking system and the brake pads in the
brake calipers are in good state and that the screws on the
disc or the locking ring of the disc, depending on your model,
are properly locked.
• To the users of more than 85kg weight, Fac Michelin S.r.l.
suggests to check the wheels status to the mechanic every
two months or every 500km.
• We reccomend using these wheels if you weigh more
than 102 Kg
• Never wash the pieces with pressure-fed water because wa-
ter may get through the seals and cause permanent damage
to the internal components. We recommend washing compo-
nents with a sponge, mild soap, and water.
• Salt water environments (as found on winter roads and
neat the seaside) can cause galvanic corrosion on most
bike parts. Carefully rinse, clean, dry and re-lubricate
all exposed parts to avoid damage, malfunctions and
accidents.
• If your component shows signs of rust, this means it has
to be changed urgently as it might be a sign of damage.
HUBS
2
Warning
!
If you have any doubt whatsoever your service-repair
ability, please take your bicycle to a qualified repair shop.
Before any maintenance operations on your wheels, always
wear gloves and protection glasses.
Use original spare parts exclusively provided by
Fac Michelin S.r.l.
When replacing any broken sealed bearings please ensure
sealed bearing correct measure and specification are used.
Rear hub
Right side 26x17x5 (6803)
Left side 26x17x5 (6803)
The Supertype 338 TDX hubs are easy to maintain. To do it,
proceed as follows:
Front hub
26x17x5 (6803)
26x17x5 (6803)