Fixed Blade/Anvil Replacement; Storage - CAMPAGNOLA EASY 80 Manual De Uso

•
The mobile blade can be replaced now (9). Add grease to the fixed blade/anvil in the indicated position (10):
•
Repeat the operations in reverse to reassemble the tool. During the reassembly operation add grease to the blade
pins.
•
Between the operations 5 and 4, move the blade manually to check the blades for proper tightening. If the
movement is difficult, the locking nut must be released by one step. If there is lateral clearance of the blade, the
locking nut must be tightened by one step.
6.5

Fixed blade/anvil replacement

•
Carry out the operations in par. 6.4 to remove the blade up to point (09).
•
Remove the fixing screws (1) and pull out the fixed blade/anvil (2):
•
Carry out the operations in reverse to reassemble the tool.
6.6

Storage

•
Do not store the battery in too hot or too cold rooms.
•
Disconnect the battery from the tool before storing the equipment for a long time.
•
Store the battery and its charger in a box to keep it away from heat sources, dust and humidity. Check that the switch
is in OFF position before storing.
•
The battery must be kept at least at 1.5 m away from any flammable
•
Before storing the tool for an extended period, it is necessary to:
- Fully recharge the battery.
- Every 6 months carry out a full battery recharge,
- During the period of tool inactivity, store it in a dry place in its case.
- The battery switch must be in OFF position during storage
Page 34
substance.
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 22/07/2019