Furman Pl-Pro Dmc E Manual Del Propietário página 7

TROUBLESHOOTING
1.) Symptom: No power to the AC outlets.
Possible Cause: The circuit breaker (located on the rear panel - adjacent to the AC inlet cord) has tripped due to excessive load.
Action Needed: Unplug one piece of equipment from the Furman conditioner and push the round reset tab into the circuit
breaker bezel.
2.) Symptom: No power to the AC outlets, "Protection OK" indicator is not lit.
Possible Cause: Either the AC outlet to which your Furman conditioner is connected has no AC voltage present, or the protection
circuitry in your unit has been compromised.
Action Needed: Plug the Furman conditioner into an AC receptacle where a nominal 220-240 VAC is present. If the problem
persists, contact Furman for service.
3.) Symptom: Extreme Voltage (EVS) indicator lit.
Possible Cause: Input voltage is above 275V causing power to the unit's outlets to be shut down. Additionally, if the voltage is
below 175V at turn on, the unit will not allow AC voltage to reach the outlets.
Action Needed: Correct the line voltage, then turn the Furman conditioner on. If the voltage present is below 215 VAC or above
245 VAC, consider installing a Furman voltage regulator.
SERVICE
If you require technical support or equipment service, please contact the Furman Service Department at 707-763-1010. You may
also email techsupport@furmansound.com.
All equipment being returned for repair must have a Return Authorization (RA) number. To get an RA number, please call the
Furman Customer Service Department.
Before returning any equipment for repair, please be sure that it is adequately packed and cushioned against damage in shipment,
and that it is insured. We suggest that you save the original packaging and use it to ship the product for servicing. Also, please pro-
vide a note giving your name, address, phone number, RA number and a description of the problem.
5 YEAR LIMITED WARRANTY
SAVE YOUR SALES RECEIPT! The receipt is your proof of purchase and confirms the product was purchased at an authorized Furman
dealer. It will need to be submitted to Furman in order to process any warranty claims. Furman, a brand of Panamax Inc., war-
rants its PL-PRO DMC E (the "Product") as follows: Furman warrants to the original purchaser of the product that the product sold
hereunder will be free from defects in material and workmanship for a period of five years from the date of purchase. If the product
does not conform to this Limited Warranty during the warranty period (as herein above specified), purchaser shall notify Furman
of the claimed defects via email (techsupport@furmansound.com). If the defects are of such type and nature as to be covered by
this warranty, Furman shall authorize purchaser to return the product to Furman headquarters. Warranty claims MUST be accom-
panied by a copy of the original purchase invoice or receipt showing the purchase date. Shipping charges to Furman headquarters
7