Publicidad
Idiomas disponibles
Idiomas disponibles
Switching the measurement template on/off
Use this button to switch a measurement template on. This measurement graphic is
also saved in the images. If the function is deactivated, you will see the
To customise the template, go to the second page of device settings and then select
the
button or press the display for 3 seconds when in live image mode to access
the
menu.
Tap the
icon or the
Tap the
icon to call up the second page of device settings:
Selecting units
Tap this button in order to switch the measuring units on the measuring scale be-
tween millimetres (
Configuring the exposure correction
Tap this button to configure a set value for the exposure correction.
Values of
,
of
,
,
,
shown in the centre of the display each time to select the next-lowest value each time.
After value
, the screen changes to value
without correction.
Adapting measurement template
Tap this button to adapt a measurement template. Tap the bottom button to switch
between a rectangle and a circle as a template.
Tap the display in the current view in order to adjust the width of the rectangle using
the
/
buttons, the height of the rectangle using the
eter of the circle with the
icon to close the menu and return to live image mode.
) and inches (
,
,
,
and
,
and
result in images with higher exposure. Tap the value
/
buttons. In this mode, the colour of the coordinate
).
result in images with lower exposure. Values
. Select the
- 23 -
Operation
icon here.
value for an exposure
/
buttons or the diam-
Publicidad
