Jonsered GC2128C Manual De Instrucciones página 9

GENERAL SAFETY PRECAUTIONS
Check the cutting attachment for damage
or cracks. A damaged cutting attachment
should always be replaced.
Sharpening grass cutters and
grass blades
S See the cutting attachment packaging for
correct sharpening instructions. Sharpen
blades and cutters using a single- -cut flat file.
S Sharpen all edges equally to maintain the
balance of the blade.
WARNING:
Use of an incorrect
or damaged blade could result in
serious injury or death. Always dis-
card a blade that is bent, twisted,
cracked, broken or damaged in any
other way. Never attempt to straight-
en a twisted blade so that it can be
reused. Only use original blades of
the specified type.
545186857 Rev. 9 5/15/12
Trimmer head
IMPORTANT!
Always ensure the trimmer line is wound
tightly and evenly around the drum, other-
wise the machine will generate harmful
vibration.
S Only use the recommended cutting at-
tachments. See the section on "Technical
data".
S Smaller machines generally require small
trimmer heads and vice versa. This is be-
cause when clearing using trimmer line
the engine must throw out the trimmer
line radially from the trimmer head and
overcome the resistance of the grass
being cleared.
S The length of the trimmer line is also im-
portant. A longer trimmer line requires
greater engine power than a shorter
trimmer line of the same diameter.
S Make sure that the cutter on the trimmer
guard is intact. This is used to cut the
trimmer line to the correct length.
S To increase the life of the trimmer line it
can be soaked in water for a couple of
days. This will make the line tougher so
that it lasts longer.
English--- 9