Declaration Of Compliance; Technical Data Table - Lotus F13-74ET Instrucciones Para La Instalación Y El Uso

Freidoras eléctricas

Ocultar thumbs

página de 26

/ 26
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

The manufacturer declares that the appliances are compliant with the prescriptions of the norm 2006/95/CE,

2004/108/CE. The installation must be done observing the norms in force particularly concerning room ventilation and

discharging gas emissions.

N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect

installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our sales

conditions.

MODELS

DIMENSIONS cm

F13-74ET

40x70x90h

40x70x29h

F13T-74ET

F2/13-78ET

80x70x90

F2/13T-78ET

80x70x29h

F18-74ET

40x70x90

F2/18-78ET

80x70x90

F2/8-74ET

40x70x90h

F2/8T-74ET

40x70x29h

MODELS

DIMENSIONS cm

40x70x90h

F2/8-74ET

F2/8T-74ET

40x70x29h

The data plate is on the side (see diagram in electric connection item) and has all the data necessary for the connection.

When fitting, the appliance must be levelled using a spirit level; slight differences of level can be adjusted by screwing

or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessibile. It is

advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed

near walls, dividing panels, kitchen furniture, decorative finishings, etc. , these should be in flameproof material;

otherwise it is necessary to cover them with non-flammable material.

Above all, it is necessary to ensure that the fire prevention norms are observed.

During installation it is necessary to observe a maximum distance between the front edge of the supporting cabinet and

the appliance.(See diagram in item "Emptying the tub").

The installation, starting up and maintenance of the appliance must be carried out by qualified personnel. All operations

done when installing must be carried out observing the norms in force.

The manufacturer declines all responsibility in the event of incorrect functioning due to wrong installation or

installation which does not comply with the norms.

Attention! In accordance with international rules,when connecting the appliance,an automatic device enabling the

disconnection of all contacts from the mains, must be installed above it.