Rear-Facing Installation; Lap-Shoulder Belt Installation (Preferred Method) - Britax ADVOCATE CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.

Rear-Facing Installation

Lap-Shoulder Belt Installation (Preferred Method)

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
28).
3. Recline the unoccupied
child seat and place rear
facing on the vehicle
seat. Ensure that no more
than 3 in. (7.6 cm) of the
base hangs over the edge
of the vehicle seat (see
pages 26-27).
4. Slide both the lap and
shoulder parts of the
vehicle belt into the rear-
facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
8
1a
1b
3"
5b
5a
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
7. Close the CLICKTIGHT.
– A click confirms the
CLICKTIGHT is secure.
Rear-Facing Installation with Lap-Shoulder Belt
9 Ensure that the logo on the CLICKTIGHT dial has
returned to a horizontal position.
9 Ensure that the recline indicator ball is within the
allowable blue section for the size of the child and that
no more than 3 in. (7.6 cm) of the base hangs over the
edge of the vehicle seat (see pages 26-27).
9 Check that all connections are secure and straps are
not twisted.
9 Check that the child seat cannot be moved front to
back or side to side more than 1 in. (2.5 cm) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
9