Introduction; Symbols; Intended Use; Purpose And Contents Of This Manual - Palazzetti INSERIMENTO A70 Manual De Instalación, Uso Y Mantenimiento

1 INTRODUCTION

The appliance is manufactured and tested to
conform with the safety standards indicated in the
applicable European directives.
This manual is intended for owners, installers,
users and maintenance personnel of stoves and
is an integral part of the product. If there are any
doubts regarding the contents of this manual,
or for any other explanations please contact the
manufacturer or an authorised service centre,
quoting the paragraph number in question.
No printing, translation and reproduction of this
manual, in part or whole, is allowed without
the permission of PALAZZETTI. The technical
information, illustrations and specifications included
in this manual may not be disclosed.
Do not operate the appliance if any of the
instructions provided in the manual are not
understood; if there are any doubts always contact
specialist PALAZZETTI personnel for explanations.
PALAZZETTI reserves the right to modify the
technical and/or functional specifications of the
stove at any time, without prior notice.

1.1 SYMBOLS

The most important points in this manual are
highlighted by the following symbols:
INSTRUCTION: Instructions concerning correct
stove operation and the responsibilities of operators.
IMPORTANT: This denotes very important
information.
DANGER: This specifies the behaviour required to
prevent accidents or damage to materials.

1.2 INTENDED USE

he product is a domestic heating stove, to
be installed indoors, with automatic operation
exclusively on wood pellets.
The stove can only operate with the firebox door
closed.
Never open the door when the stove is operating.
The appliance is not intended for use by people
(including children) with limited physical, sensorial
or mental abilities, or without sufficient experience
or knowledge, unless they are supervised or
instructed on the use of the appliance by a person
responsible for their safety.
The intended use of the stove described above
and the configurations available are the only ones
permitted by the manufacturer: never use the
stove in any way not described in the instructions
provided.
26
INTRODUCTION
1.3
1.4

1.5 UPDATES TO THE MANUAL

1.6 GENERAL INFORMATION

00 4776070 - 17/12/2018 - PN - Italy

PURPOSE AND CONTENTS OF THIS MANUAL

Purpose
The purpose of the manual is to allow the user to
take the necessary precautions and to have all the
human and material means required for its correct,
safe and lasting use.
Contents
This manual contains all the information necessary
for installation, use and maintenance of the wood
insert.
By complying scrupulously with the contents of this
manual you will ensure a high degree of safety and
productivity of the wood insert.

HOW TO KEEP THIS MANUAL

Storage and reference
This manual must be kept with care and must be
always available for reference by the user and by
assembly and maintenance personnel.
The installation manual is an integral part of the
stove.
Damage or loss
If required, an additional copy can be ordered from
PALAZZETTI.
Sale of the stove
If the stove is sold the user must also provide the
new owner this manual.
TThis manual reflects the state-of-the-art at the time
the wood insert was put on the market.
The wood inserts already on the market, together
with their technical documentation, will not
be considered by PALAZZETTI as wanting or
inadequate simply because changes or adjustments
have been made or new technologies have been
applied to the next generation of wood inserts.
Requesting information
If information is requested from the manufacturer
of the stove, always refer to the serial number
and other identifying data shown on the product's
identification label.
Special maintenance
Special maintenance operations must be carried
out by qualified personnel who are authorised to
work on the model of stove that this manual refers
to.
Responsibility for installation
PALAZZETTI accepts no responsibility for the work
carried out to install the stove; such responsibility
lies with the installer, who is required to carry
out checks on the flue and air intake and ensure
installation is completed correctly. Furthermore, all
safety standards required by relevant legislation
in force in the country where the stove is installed
must be complied with.
Use
The stove must only be used in compliance with the
instructions provided in this manual, as well as with
all safety standards required by relevant legislation