Pellets Loading - Palazzetti INSERIMENTO A70 Manual De Instalación, Uso Y Mantenimiento

6.5 PELLETS LOADING

The pellets are loaded via a hatch to be fitted to the
hood of the enclosure and connected to the stove
with the optional accessory equipment. Make sure
to follow the installation instructions included with
the kit.
Do not use the stove removal system to load the
pellet tank.
Do not use non-original accessories.
Pellets falling outside the tank can compromise the
proper operation of the stove and may ignite and
cause fire.
The pellet loading pipe must be used solely as a
chute for loading the tank and not as an extension to
the tank itself; do not fill the tank beyond its normal
capacity (without the pipe).
6.5.1 Optionals available:
A) Loading system with flexible metal tube and loading
hatch "1" (Fig. 6.4.4 A-B)
B) Front loading drawer for channelled air version "2"
(Fig. 6.4.4 A)
C) Front loading drawer for front air version "3" (Fig.
6.4.4 B)
D) Pedestal kit "4" and finishing frame for plasterboard
"5" (Fig. 6.4.4 C)
INSTALLATION
00 4776070 - 17/12/2018 - PN - Italy
1
1
Fig. 6.4.4 B
5
4
Fig. 6.4.4 .C
Fig. 6.4.4 A
2
3
39