smartheart 01-539 Manual De Instrucciones página 15

TAKING YOUR MEASUREMENTS
YOU CAN STOP THE INFLATION OR
DEFLATION PROCESS AT ANY TIME BY
PRESSING THE START/POWER BUTTON.
8. When the inflation has reached optimum level, the
display will begin to show the decreasing pressure
while you feel the pressure of the cuff decrease.
9. When the measurement is complete, your blood
pressure measurement and pulse will display
separately on the screen alternating repeatedly
every 2-3 seconds, Fig 5. The systolic and diastolic
readings will display at the same time.
10.The hypertension Indicator will indicate your
reading range in the left side of the display, Fig 6.
See page 17 for a chart interpreting the
hypertension Indicator results.
11.If an irregular heartbeat was detected during the
reading, the Irregular heartbeat Detector icon
will appear flashing on the display for both the
measurement results and pulse results screens, Fig
7. See page 16 for more information on the
Irregular heartbeat Detector feature.
12.The reading will automatically be stored in the
memory bank selected prior to the measurement,
up to 60 readings.
13.Select START to turn the unit off and conserve
energy and battery life. The unit will automatically
shut-off and revert to time/date mode after
approximately 1 minute.
14.Disconnect the cuff and tubing prior to storage.
Systolic/Diastolic Results
Pulse Results
Fig. 5
Fig. 6
Fig. 7
ENGLISH • 15