RealFlame C11800LP Manual Del Usuario página 12

ASSEMBLY INSTRUCTIONS
5
Place crushed glass by hand. DO NOT dump bag out into tray to avoid
clogging the burner with dust. Position the crushed glass to a level
about 1" above the top of the burner. Make sure that you do not block
the igniter housing with crushed glass to ensure proper ignition.
Igniter Housing
Lava Rock and Glass Filler Warning:
1. Do not overfill the burner area with rock or glass filler. The depth of the filler should not be
more than one inch above the burner tube. Only Real Flame filler products have been
certified and tested by CSA for safe use with this Real Flame fire table. Using other filler
material may result in increased popping/ and cracking or increased CO gas emission.
2. Do not light or use this fire table if filler is wet. Ensure filler is completely dry before lighting.
Intense heat can cause wet filler to explode and hit someone causing injury.
3. Please keep away from the fire table for at least 20 minutes during initial start-up as filler
could retain some moisture from manufacturing and shipping.
12