Preparing For Use; Suggested Coffee Measurement Chart; Water Filtration System - Mr Coffee JW Serie Manual Del Usuario

PREPARING FOR USE

Selecting and Measuring Ground Coffee
For best results, use a level tablespoon for ground coffee measurement.
Make sure you use medium grind coffee for a perfect brew.
A. Suggested Coffee Measurement Chart
To Brew
12 Cups
10 Cups
8 Cups
6 Cups
4 Cups
1 level tablespoon (tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of brewed coffee
Use more or less coffee to suit your taste.
10
Ground Coffee
9 tbsp.
7.5 tbsp.
6.5 tbsp.
4.5 tbsp.
3 tbsp.
B. Water Filtration System
This carbon-based water filter improves the taste of your coffee by removing up to 97%
of the chlorine from the water you may use to brew your coffee.
First, look for the MR. COFFEE ® Filtration Friendly symbol
filter basket. If you do not see this symbol, please call 1-800-672-6333.
To use the water filtration system in your
MR. COFFEE ® Coffeemaker, please follow
these steps:
1. Align the red indicator on the frame to the
letter that corresponds with the month that
you are using the disk for the first time. This
serves to remind you to change the disk
every month (approx. 30 brewing cycles).
NOTE: For optimum results, use the water
filtration system with a permanent filter.
2. Rinse the water filter in fresh water before first use.
3. Follow Adding Water and Coffee instructions.
4. When you are done brewing your coffee, rinse
the water filter with fresh water. Do not put
your water filter in the dishwasher.
To replace the water filter disks, twist the gray
disk cover from your water filtration system.
Remove the used disk. Insert the new disk into
the frame and twist the cover back into place.
Replacement water filtration disks can be
purchased online at www.mrcoffee.com, at
a local retailer, or by calling 1-800-MRCOFFEE
in the U.S. or 1-800-667-8623 in Canada.
on the bottom of your
Red
Indicator
Frame
Filter Disk
Disk Cover
11