Servicing And Care; Burner Cleaning; Scraper'S Use (In The Models That Incorporate It); Cleaning The Ash Pan - Bio Bronpi NEVA Instrucciones De Instalación, Uso Y Mantenimiento

Menú 01
VENT-2 1
VENT-3 2
D30
8

SERVICING AND CARE

The maintenance operations guarantee a proper working of the product over its lifetime. Not making these maintenance operations will affect
the security of the product.
8.1

BURNER CLEANING

The burner cleaning must be made daily (see drawing D31).
• Remove the burner from its place and clean the holes.
• Use a vacuum to get rid of the ashes in the burner. You can buy
a Bronpi vacuum-cleaner in the same Bronpi distributor where you
bought your stove.
D32
D34
humidity to create soot (creosote). An excessive accumulation of soot may cause problems in the smoke outlet and the flue may catch fire if
not maintained.
The cleaning of the stove chimney should only be made when the equipment is cold. A chimney sweep should perform this task and, at the
same time, examine the smoke duct (it is recommended to write down the dates of every cleaning and keep a register of them).
8.6

CLEANING THE GLASS

IMPORTANT:
Clean the glass only when it is cold in order to avoid possible explosion. You can use specific products. You can find
Bronpi vitro ceramic-cleaning product in the same Bronpi distributor where you bought your stove (see drawing D35).
BREAKAGE OF GLASSES. The glasses, as they are vitro ceramic, resist until 750ºC and they are not subject to thermal
shocks. The breakage can only be caused by mechanical shocks (crashes or violent closing of the door, etc). Therefore,
its replacement is not included in the warranty.
8.7

EXTERNAL CLEANING

Do not clean the external surface of the stove or insert with water or abrasive products because they may damage the stove. Use a feather
duster or a rag a bit wet.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
The regulation of the channelling system is made by the electronic system of the stove, therefore you can
choose the operation of the channelling by selecting the power level desired for each fan regardless of the
working power of the stove. To do this you have to access to menu 1 and choose the fan activation and
the working power (see drawing D30).
NOTE: the model CLEO-NC lacks of channeling fans.
8.2

SCRAPER'S USE (IN THE MODELS THAT INCORPORATE IT)

The smoke chamber cleaning allows that the thermal power is constant during a long time. This operation
must be made at least once a day. To do it just use the scrapers placed on the top of the stove, by moving
them up to down and vice versa several times (see drawing D32).
NOTE: The model Neva has not these scrapers.
8.3

CLEANING THE ASH PAN

The ash pan should be emptied when necessary. The stove should not be
operated without having the ash pan inside (see drawing D33).
8.4

SEALS OF THE COMBUSTION DOOR AND THE GLASS FIBRE

The seals of the door and the glass fibre guarantee the hermeticism of the stove
or insert and, thus, a proper performance (see drawing D34).
It is necessary to check them regularly; if they are worn-out or damaged they
should be replaced immediately. You can find ceramic cord and self-adhesive
fibre at the same Bronpi distributor where you bought your stove.
These operations should be done exclusively by an authorised technician.
An authorised technician must do the maintenance at least once a year.
8.5

CLEANING THE CHIMNEY

When the pellet is burnt slowly, it produces tar deposits and other organic vapours that combined with the
33
D31
D33
D35
RADIOFREQUENCY SERIES