STOK QUATTRO SGP4032N Manual Del Usuario página 12

STEP 4: MOUNTING THE FIREBOX TO THE
CABINET
See Figure 8.
NOTE: This step requires two people to lift and correctly
position the grill assembly on the cabinet.
 Lower the firebox assembly onto the cabinet, aligning
the holes in the firebox with the holes in the cabinet.
NOTE: Regulator hose should be hanging down inside
the cabinet; be careful not to damage.
 Using four bolts, M5 x 12 mm (HH) one in each corner,
secure the firebox assembly to the cabinet.
BOLT
FIREBOX
(HH)
ASSEMBLY
Fig. 8
ASSEMBLY
REGULATOR
HOSE
12
STEP 5: INSTALLING THE HOOD ONTO THE
FIREBOX
See Figure 9.
 To install the temperature gauge, remove the hex nut,
lock washer and washer.
 Insert the large threaded post through the large hole in
the hood and insert the small post into the small hole in
the hood.
 Install the washer, lock washer, and hex nut onto the post.
Securely tighten.
TEMPERATURE GAUGE (V)
THREADED
POST
SMALL
HOLE
WASHER
LOCK WASHER
NUT
HOOD
LOCK WASHER
(CC)
WASHER
(BB)
HOOD BOLT
(DD)
Fig. 9
SMALL
POST
GRILL
HOOD
LARGE
HOLE
HOOD
NUT (AA)