Maintenance - STOK QUATTRO SGP4032N Manual Del Usuario

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
GENERAL MAINTENANCE
Do not mistake brown and black build up of grease and
smoke for paint. The inside of the hood is not painted and
should never be painted. When cleaning the inside of the
hood and grill bottom, use a strong solution of detergent
and water with a scrub brush to clean. Rinse thoroughly and
allow to air dry. NEVER use a caustic grill cleaner on painted
or cooking surfaces.
All plastic parts, stainless-steel and painted surfaces, should
be cleaned with warm soapy water and wiped dry. Cook-
ing surfaces should be cleaned with a bristle brush only.
Check that no loose bristles remain on the cooking grates
prior to using.
Cooking grates:
 Clean before and after each use with a stiff wire brush.
Heat tents:
 Scrape any build up off the heat tents using a wire brush.
Grease tray and grease cup:
 After use, allow the grease in the tray and cup to cool
then empty into the garbage.
 Empty after each use to avoid spillage and flare ups.
CLEANING BURNER ASSEMBLY AND
CHECKING VENTURI FOR INSECTS
See Figures 29 - 32.
DANGER:
Failure to clean the burner assembly and checking the
venturi as described can result in a fire or explosion
resulting in serious injury or death.
Burners should be cleaned when the grill has been idle
for some time. In some parts of the country, spiders and
other insects can spin webs, build nests, and lay eggs in
the venturi blocking gas flow and causing fire in the tubes
known as "flashback". Flashback can damage the grill and
even cause injury.
 Turn all control knobs on the control panel OFF ( O ).
 Lift and remove cooking and heat grates from inside the
grill.
 Remove hitch pin securing the burner(s) to the bottom of
the grill.
 Pull electrode wire from the electronic ignitor.
 Lift burner up and away from the gas valve openings.

MAINTENANCE

Fig. 29
ELECTRONIC
IGNITOR
Fig. 30
22
HITCH
PIN
ELECTRODE
WIRE