WAGNER FLEXIO 2000 Manual Del Usuario página 5

CoNTRolS AND fUNCTioNS
+
+ -
2000
-
- +
iSPRAY
wiDe
=
=
=
=
=
=
-
x-BooST™ PoweR DiAl
the X-Boost power dial adjusts the level of air power
3000
produced by the turbine.
the FleXio sprayer model 2000 is equipped with a
2-speed air power control (hI / lo).
the FleXio sprayer model 3000 is equipped with a
+
variable speed air power control (1 - 12).
MATeRiAl flow CoNTRol
DeTAil fiNiSh
the material flow control determines the amount of
spray material that is sprayed from the spray nozzle.
iSpray nozzle - the material flow can be adjusted
incrementally from 1 (minimum) to 12 (maximum) by
turning the adjustable material flow control.
Detail Finish nozzle (3000 only) - Set the material flow
by turning the red knob on the trigger of the spray gun.
TRiGGeR
pulling the trigger will deliver spray material from the
material container to the nozzle assembly, where it is
sprayed.
NARRow
SPRAY wiDTh leveR
the spray width lever determines the width of the spray
pattern.
AiR CAP
adjust the spray pattern by turning the air cap ears. the
air cap position will determine the movement direction
of the spray gun.
horizontal pattern (use 'up and down' spraying motion)
Vertical pattern (use 'side to side' spraying motion)
eN
5