Valve Assembly - Bradley Advocate AV Serie Manual De Installation

Installation
7b Valve Assembly
Attach angle stops to hot and cold
B
stub outs. Attach 1/2" supply hoses
to hot and cold supply stops.
Angled Supply Stop
⁵⁄₈" O.D. x ³⁄₈" O.D.
Bradley • 215-1772 Rev. D; ECN 13-08-028
¼" Supply Tube
(from faucet)
Green, left hand
Supply Hose, Cold
½" x 24"
Supply Hose, Hot
½" x 24"
D
For clarity, the front dryer
hose is not shown.
Loosen the compression nut. Push the supply
A
tube firmly into the tube connector until it is
seated. Retighten the compression nut by hand.
Valve,
Valve, Hot
Cold Supply
Attach transformer circuit plug to
transformer connector plug on
gang valve bracket. attach gang
valve to the wall. See Step 1a for
valve bracket anchor locations.
1/21/2014
Two-Station Valve
TMA Valve (S45-2485) is shown
TL Valve (S45-2484) is similar
C
Attach hot and cold
hoses to the valve.
Supply
AV60
¼" Supply Tube
(from faucet)
Red, right hand
17