Trap Cover - Bradley Advocate AV Serie Manual De Installation

AV60

12 Trap Cover

Tuck any loose wires into the
frame prior to installing the
trap cover to the frame.
Position the bottom
of the trap cover
A
between the end cap
return flange and the
bottom tab.
End Cap
Return
Flange
Trap
Cover
20
Rotate the trap cover up
B
and tuck the edges behind
the basin apron.
End Cap
Bottom Tab
1/21/2014
AV30 is shown. AV60 is similar.
Secure the trap
cover with two
C
#10 x ½" flat head
screws provided.
Use ¹⁄₈" hex driver
to install trap cover.
Bradley • 215-1772 Rev. D; ECN 13-08-028
Installation