Assembling The Unit - Stihl RE 98 Manual De Instrucciones

Assembling the Unit

The following accessory parts must be
fitted before using the machine for the
first time.
Handle frame
1
2
2
Press the handle frame (1) onto the
N
holders (2) from above – handle
frame must snap into position
RE 98
Holder for high-pressure hose
4
Position the holder (3) for the high-
N
pressure hose between the sides of
the handle frame
Press the plugs (4) through the
N
handle frame into the mounts of the
holder – the plugs must snap into
place and be inserted flush in the
handle frame
Holders for power cord
5
3
5
Press the holders (5) for the power
N
cord into the mounts on the housing
4
– holders must snap into place
Connector on water inlet
Attach the connector (6) to the
N
water inlet by hand and tighten it
English
6
37