Confirm Proper Operation - Kohler K-1111-VLN Guia De Instalacion

Flexjet - Turn the jet trim ring fully
counterclockwise and position the
jet nozzle downward.
13. Confirm Proper Operation
Fill the Whirlpool
NOTE: Please read these steps carefully before you operate your whirlpool.
Turn the jet trim rings fully counterclockwise. Position the jet nozzles so they face down toward the
basin.
Fill the whirlpool with water until the water level is above the highest backjet.
NOTE: The water temperature in the whirlpool should not exceed 104°F (40°C). The heater will
automatically turn off as the water temperature approaches 104°F (40°C) and will remain off until the
water cools.
Kohler Co.
Water-Level Sensors - To use all functions (including
backjets), fill to a level above both water-level sensors.
Suction Cover
13 1042760-2-C