Britax ROUNDABOUT 55 Guia Del Usuario página 21

Care and Maintenance
Cleaning the Buckle
If your child eats and drinks while in the child seat, you will need
to check the buckle periodically and rinse out any accumulated
debris.
Removing the Buckle
Unbuckle the harness.
1
Remove the belly pad and
push the buckle through the
cover.
Turn the buckle webbing
2
and slide it between buckle
positions.
Guide the buckle retainer up
3
through the slot in the child
seat shell to remove.
To Clean:
• THOROUGHLY RINSE the buckle using warm water.
• TEST THE BUCKLE by fastening and unfastening until a click is
heard after inserting each buckle tongue. If clicks are not heard,
repeat the cleaning procedure.
• TOWEL DRY
• DO NOT:
* Soak
* Lubricate
* Use solvents
* Use soap or household detergents
38
Replacing the Buckle
IMPORTANT:
• ALWAYS position the buckle in the
inner slot for rear-facing use when
using a vehicle seat belt installation.
• The vehicle belt must pass in front
of the buckle strap for rear-facing
use.
• Position the buckle in the slot
closest to but not under the child for rear-facing use when using the
LATCH installation.
• NEVER leave the buckle in the adjustment slot.
• Use the outer buckle slot when installing the child seat forward-facing
with a child weighing 30 lbs (13.6 kg) and above or if the buckle is
under the child in the inner position.
Guide the buckle retainer
1
down through the slot in the
child seat shell.
Slide the buckle webbing
2
into the slot between buckle
positions.
Select the appropriate slot for
3
the size of your child and turn
the buckle webbing and slide
it into the chosen slot.
Ensure that the buckle strap is
4
not twisted and that the button
faces out.
Care and Maintenance
ADJUSTMENT
SLOT
39