Brinkmann 810-7490-S Manual Del Propietário página 22

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION ! Some parts may contain
sharp edges. Wear
protective gloves if
necessary.
Step 1
Install the wheels as illustrated, by
inserting the wheel axle bolts through
the wheels, washers and right side
leg axle holes. Tighten axle bolts
securely using hex nut wrench
provided in parts card. Snap wheel
hub caps onto the outside of wheels
as illustrated.
Note:
When raising or lowering grill,
unlatch locks on leg end caps
and make sure hose/regulator
is clipped into bracket to avoid
damage to your hose/regulator.
Lift Handle
Hold Down
Foot Rest
Step 2
When raising or lowering the grill,
make sure area around "pinch points"
are clear. To lift the grill into the
upright position, place foot on foot
rest, hold down with foot while lifting
on side handle. Ensure the leg pins
lock into the "V" notch.
CAUTION ! Failure to secure lock
latches may cause grill to
collapse causing bodily
injury and damage to your
grill.
21
Hubcap
Wheel axle
bolt
"V" Notch
Lock Latch
Wheel
Leg
Washer
Lock Latch