Setting Up Your Machine - Singer 83933 Manual De Instrucciones

Tabla de contenido

Publicidad

SETTING UP YOUR MACHINE

Be sure to wipe off any surplus oil from
needle plate area before using your machine
the first time.
POWER LINE CORD/FOOT CONTROL
Connect the plug of the power line cord into
the cord socket (1) and your wall outlet (2)
as illustrated.
Connect the foot control plug (3) into the
machine socket.
NOTE:
W h e n f o o t c o n t r o l i s
disconnected, the machine will not
operate.
POWER/LIGHT SWITCH
Your machine will not operate until the
power/light switch is turned on. The same
switch controls both the power and the light.
When servicing the machine, or changing
needles, etc., machine must be disconnected
from the power supply.
10
Set power/light switch at "OFF"
Mettez l'interrupteur moteur/
lumière à la position « Fermé »
Poner el Interruptor de corriente/luz
en "OFF"
1
Pin plug
Butée
Conector
Foot control
Rhéostat
Control por pedal
Always disconnect the machine from power
supply by removing the plug from the electrical
outlet.
Power/light switch "OFF"
Interrupteur moteur/lumière
« Fermé » (OFF)
Interruptor corriente/luz "OFF"
Machine socket
Prise du cordon
de la machine
Conector de la máquina
Power line cord
3
Cordon d'alimentation
Cordón de la linea eléctrica
Power/light switch "ON"
Interrupteur moteur/lumière
« Ouvert » (ON)
Interruptor corriente/luz "ON"
2

Publicidad

Tabla de contenido
loading

Tabla de contenido