Ikegami ICD-879 Manual De Instrucciones página 16

⑤ MANUAL
With this, Rate of Sensitivity Up is fixed with the shutter.
This may be favourably used under the stable lighting condition.
*Note: The same level of screen noise and blurr may be the same even in all three
mode of S/N, STD or MOVE, if the Sensitivity Up was set at its maximum
level.
(2) After selecting the preferable mode,
push E button. Then, the scrren as right
will appear and the setting for Day/Night
selection and On/Off selection of Flicker
Free mode.
* Flicker Free function does not work
when Sens.Up is set at OFF.
If you want to use Flicker Free function,
set 1/100 in SHUTTER setting mode.
(3) DAY/NIGHT
With the L and R buttons, make the AUTO,
COLOR or B/W (Monochrome) setting.
① AUTO
Automatic switching is made: high-
quality color images during the day,
and high-sensitivity monochrome
pictures at night. Press the E button,
and the screen at right shows up.
• B/W BURST
The burst signal in Monochrome
(B/W) pictures can be selected ON
or OFF.
• SW LEVEL
The brightness level for switching
to the day or night mode can be
preset. With L and R button, the
levels can be selected in the order
of BRIGHT, MID and DARK.
The following screen appears, when selected MANUAL.
The thresh-hold can be set to change from color to monochrome picture,
or visa versa.
ＳＥＮＳ ＵＰ
ＤＡＹ／ＮＩＧＨＴ ＡＵＴＯ
ＦＬＩＣＫＥＲ ＬＥＳＳ ＯＦＦ
ＲＥＴ ＥＸＩＴ
ＤＡＹ／ＮＩＧＨＴ
Ｂ／Ｗ ＢＵＲＳＴ ＯＮ
ＳＷ ＬＥＶＥＬ ＭＩＤ
ＲＥＴ ＥＸＩＴ
ＤＡＹ／ＮＩＧＨＴ
Ｂ／Ｗ ＢＵＲＳＴ ＯＦＦ
ＳＷ ＬＥＶＥＬ ＭＡＮＵＡＬ
ＣＯＬ→Ｂ／Ｗ Ｌ・・・Ｉ・・・・Ｈ
Ｘ１２
Ｂ／Ｗ→ＣＯＬ Ｌ・・・Ｉ・・・・Ｈ
Ｘ２
ＲＥＴ ＥＸＩＴ
E-13