Ikegami ICD-879 Manual De Instrucciones página 17

Ocultar thumbs Ver también para ICD-879:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

② REMOTE
The color or monochrome(B/W) mode
can be remotely selected by getting
the remote terminal at the back of the
camera open or short-circuited. In this
state, press the E button, and the sub-
menu screen shows up. The terminal
polarity can now be preset.
• MAKE
The monochrome(B/W) mode can be selected by getting the remote
terminal short-circuited.
(The color mode can be selected with the terminal open.)
• BREAK
The monochrome(B/W) mode can be selected by getting the remote
terminal open.
(The color mode can be selected with the terminal short-circuited.)
③ COLOR
The color mode can be selected.
④ B/W
The Monochrome (B/W) mode can be selected. Press the E button in this
mode, and the menu opens up and the "B/W BURST" setting can be made
like as above ①.
(4) FLICKER LESS
① ON
To Make Flicker Free active while
Sensitivity Up is set.
The shutter speed is 1/100 a sec.,
when Sensitivity Up is OFF.
② OFF
The shutter speed is 1/60 a second,
when Sensitivity Up function is not
active.
5-4-3. SHUTTER
(1) This mode is effective, when the light control is LENS mode.
(2) When Sensitivity Up function is OFF (SENS UP = OFF)
① By L or R button, high speed shutter can be valid for OFF, FL (1/100), 1/125,
1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000, or Variable.
       DAY/NIGHT
 CONTROL SIGNAL  MAKE
      RET   EXIT
        SENS UP
 DAY/NIGHT     AUTO
 FLICKER LESS  OFF
      RET   EXIT
E-14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido