Replacing The Fuse; Technical Specifications - HQ-Power VDPLT5S Manual Del Usuario

Tubo led con controlador y pie
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Clean the external optics with glass cleaner and a soft cloth every 20 days.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
8.2

Replacing the fuse

Refer to the illustrations on page 2 of this manual.
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
3.
Open the fuse holder.
4.
Replace with an appropriate fuse.
5.
Insert the fuse holder back in its place and reconnect power.
9.

Technical Specifications

power supply
power consumption
IP rate
LED source
beam angle
DMX in- and output
KlingNet control
dimensions
tube
controller
weight
tube
controller
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 29/07/2015
VDPLT5S
100 ~ 240 V~, 50/60 Hz
120 W
IP20
64 x SMD5050 RGB LED for each tube
360°
3-pin XLR, linkable
linkable
Ø 28 x 1000 mm
250 x 150 x 67 mm
250 g
1.4 kg
8
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido