Setting The Date; Stopwatch - Seiko V176 Manual Del Usuario

SETTING THE DATE

l Before setting the date, be sure to set the main time.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
10
CROWN
Unlock.
t
Pull out to the first click.
t
Turn clockwise until the desired date
appears.
t
Push back into the normal position.
t
Screw all the way in until it is locked.

STOPWATCH

l The stopwatch can measure up to 60 minutes in 1/20-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
l After 1 minute of timing from a start, the STOPWATCH 1/20-second hand
remains pointing to the "0" position until the watch is stopped or split time
measurement is made, at such a time, it moves to display the measured
time. It starts to move for a maximum of 2 minutes after the watch is
restarted or the split time display is released.
STOPWATCH 1/20-second hand
STOPWATCH second hand
STOPWATCH minute hand
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
A
B
11